CIPS - Big Savings Alert – Don’t Miss This Deal - Ends In 1d 00h 00m 00s Coupon code: 26Y30OFF
  1. Home
  2. CIPS
  3. L5M9 Exam
  4. Free L5M9 Questions

Free CIPS Operations Management (L5M9) Practice Questions

These CIPS L5M9 sample questions are a small glimpse of our full set of CIPS L5M9 actual questions. They give you a preview of what the real L5M9 exam might look like and the contents of Pass4Future's premium CIPS L5M9 product. You must not underestimate the value of CIPS L5M9 practice exam questions, as they allow you to understand the actual Operations Management exam in greater depth. Using them will save your time and money otherwise wasted in Operations Management exam reattempts. Study guides and tutorials provide you with theoretical details about the L5M9 exam; these L5M9 practice exam questions prepare you to pass the exam. Get Pass4Future's premium access to continue your L5M9 exam practice with the complete set of CIPS L5M9 realistic questions. Our CIPS L5M9 practice questions come in various formats; make sure to check out the details and free demo of each format.

CIPS L5M9 Sample Exam Questions

Page:    1 / 14   
Total 120 questions

Question 1

Which of the following would you likely find on a Process Control Chart which is being used to monitor the quality of products manufactured in a factory?



Answer : B

A process control chart plots a statistic through time against a centre line and statistically derived upper and lower control limits. The limits distinguish expected common-cause variation from evidence of special causes; they are not customer specification limits. Manufacturing temperatures, filling weights and defect proportions can be monitored with different chart families. Flow diagrams show process sequence, while activity slack belongs to project scheduling. A control chart supports timely investigation when observations or patterns indicate instability. Teams should distinguish prevention, detection and measurement rather than treating all quality methods as interchangeable. Reliable data, appropriate thresholds and documented follow-up are essential. Improvements should target the causes of nonconformity while ensuring that product and service requirements remain satisfied. The appropriate selection is upper and lower control limits. This follows from the distinction between the concept described and the alternative activities or measures in the answer choices. The resulting evidence should support management decisions and feed back into standard operating procedures and employee training.

Study Guide Reference: CIPS L5M9 -- Analyse techniques for quality improvement that can be applied in operations management; the uploaded question bank cites study-guide page(s) 127.


Question 2

There are four manufacturing companies located on Seashell Industrial Estate. Each company creates a different product and employs a different maintenance approach to its operations. For each company, select the corresponding maintenance approach and the key operating process characteristic.

Company 1: This company creates craft beer and offers customers a tour of the brewery for a small charge. The brewing equipment is serviced monthly and the brewery is kept extremely clean. All equipment is labelled with the last service date.

Company 2: This company produces seasonal items such as Easter Eggs and Christmas Cake. The equipment has a control panel where lights will flash red advising staff to check oil levels and components. Staff can then report issues to the maintenance team if remedial work is required. Product demand fluctuates throughout the year.

Company 3: This equipment does not often break down and is only fixed when it is reported by staff as no longer working. Company 3 creates toys, providing a large range of product sizes and colours based on different customer requirements.

Company 4: Parts of the machine are serviced quarterly but in general, the machine is left to run its course and is then replaced when it is no longer financially viable to fix. The company produces cereal and the operating process is focused on the quantity produced and therefore uses standardised processes.

Complete the table below by listing the maintenance approach and operating process characteristic for each company. Each response should only be used once: preventive maintenance, run to breakdown maintenance, condition-based maintenance, mixed maintenance, volume, visibility, variation, variety

Company

Maintenance approach

Operating-process characteristic

Company 1

Box 1

Box 5

Company 2

Box 2

Box 6

Company 3

Box 3

Box 7

Company 4

Box 4

Box 8

Which of the following will you put into box 3?



Answer : B

Company 3 repairs a machine only after employees report it has stopped functioning. This is run-to-breakdown or run-to-failure maintenance, a strategy sometimes used for non-critical equipment with low replacement cost and limited safety consequences. It avoids planned servicing but accepts unplanned downtime and potential emergency repair expenditure. Critical assets generally warrant more preventive attention. The company also manufactures many toy variations, but that operating-process characteristic is distinct from the decision to repair machinery only after failure. Reliable operations depend on designing out avoidable faults and responding systematically when failures occur. Teams should capture defect and incident evidence, identify root causes and test corrective actions. A response that merely restores service without addressing repeat failure may increase long-term operating costs. The appropriate selection is run-to-breakdown maintenance. This follows from the distinction between the concept described and the alternative activities or measures in the answer choices. Documented responsibilities, suitable spare capacity and tested recovery arrangements can reduce the duration and consequences of disruption.

Study Guide Reference: CIPS L5M9 -- Explain techniques in failure prevention and recovery that can be applied in operations management; the uploaded question bank cites study-guide page(s) 48, 103.


Question 3

In order to keep processing costs down, which of the following should a company opt for in terms of operating processes?



Answer : B

High volume spreads fixed cost over more units and makes repetitive automation feasible. Low variety reduces equipment changeovers, routing complexity and the number of different materials and procedures required. Together they commonly produce lower processing costs. High variety, strong demand variation and high customer visibility can require additional flexibility or labour. Costs must nevertheless be assessed against the value customers expect; a premium custom producer may deliberately choose a higher-cost process. Effective process design depends on defining customer requirements and selecting resource arrangements that deliver them consistently. Performance measures should capture both resource efficiency and service outcomes, because an apparently economical process can still fail if it does not provide the required output at the right time. The appropriate selection is high volume, low variety. This follows from the distinction between the concept described and the alternative activities or measures in the answer choices. The selected approach should be documented and monitored so that managers can distinguish normal process behaviour from avoidable performance problems.

Study Guide Reference: CIPS L5M9 -- Evaluate operations management processes; the uploaded question bank cites study-guide page(s) 50.


Question 4

There are four manufacturing companies located on Seashell Industrial Estate. Each company creates a different product and employs a different maintenance approach to its operations. For each company, select the corresponding maintenance approach and the key operating process characteristic.

Company 1: This company creates craft beer and offers customers a tour of the brewery for a small charge. The brewing equipment is serviced monthly and the brewery is kept extremely clean. All equipment is labelled with the last service date.

Company 2: This company produces seasonal items such as Easter Eggs and Christmas Cake. The equipment has a control panel where lights will flash red advising staff to check oil levels and components. Staff can then report issues to the maintenance team if remedial work is required. Product demand fluctuates throughout the year.

Company 3: This equipment does not often break down and is only fixed when it is reported by staff as no longer working. Company 3 creates toys, providing a large range of product sizes and colours based on different customer requirements.

Company 4: Parts of the machine are serviced quarterly but in general, the machine is left to run its course and is then replaced when it is no longer financially viable to fix. The company produces cereal and the operating process is focused on the quantity produced and therefore uses standardised processes.

Complete the table below by listing the maintenance approach and operating process characteristic for each company. Each response should only be used once: preventive maintenance, run to breakdown maintenance, condition-based maintenance, mixed maintenance, volume, visibility, variation, variety

Company

Maintenance approach

Operating-process characteristic

Company 1

Box 1

Box 5

Company 2

Box 2

Box 6

Company 3

Box 3

Box 7

Company 4

Box 4

Box 8

Which of the following will you put into box 2?



Answer : C

Company 2 uses indicator lights to prompt checks of oil levels and components before failure. Condition-based maintenance relies on observed state or diagnostic alerts, allowing intervention when an asset shows signs of deterioration. It can improve reliability while avoiding servicing that is not yet needed. A time-only reminder would be preventive maintenance, and waiting until the machine stops is run-to-breakdown. Seasonal production makes uptime especially important because failures during peak periods can cause disproportionate losses. Where consequences are significant, managers should prioritise preventive controls, reliable monitoring and prompt restoration. Performance measures such as downtime, MTBF, repair time and availability help identify weaknesses. The chosen technique must also account for costs, safety and the possibility of common-cause failures. The appropriate selection is condition-based maintenance. This follows from the distinction between the concept described and the alternative activities or measures in the answer choices. Documented responsibilities, suitable spare capacity and tested recovery arrangements can reduce the duration and consequences of disruption.

Study Guide Reference: CIPS L5M9 -- Explain techniques in failure prevention and recovery that can be applied in operations management; the uploaded question bank cites study-guide page(s) 48, 103.


Question 5

When quality is used as a foundation to build improvements in other areas such as dependability, what is this theory known as?



Answer : C

The Sand Cone Theory treats capabilities as cumulative rather than exclusively competing. Quality establishes a stable foundation; dependability builds on consistent output; speed follows reliable flow; and cost effectiveness can emerge from lower rework, delay and waste. Management should continue strengthening earlier capabilities while developing new ones. Ferdows and De Meyer's model challenges an assumption that every improvement must sacrifice another dimension. None of the other named theories is the recognised cumulative-capabilities framework here. Effective application requires a clear baseline and a mechanism for testing whether action improved performance. Managers should distinguish leading indicators from final outcomes and avoid drawing causal conclusions from simple association. The strongest tools connect evidence, decisions and sustained operational controls. The appropriate selection is sand cone theory. This follows from the distinction between the concept described and the alternative activities or measures in the answer choices. Consistent measurement and periodic review are necessary to distinguish a sustained improvement from a temporary or misleading change.

Study Guide Reference: CIPS L5M9 -- Analyse tools for improving performance in operations management; the uploaded question bank cites study-guide page(s) 84.


Page:    1 / 14   
Total 120 questions