Pass4Future also provide interactive practice exam software for preparing Dell EMC Dell PowerScale Maintenance Version 2 (D-PSC-MN-01) Exam effectively. You are welcome to explore sample free Dell EMC D-PSC-MN-01 Exam questions below and also try Dell EMC D-PSC-MN-01 Exam practice test software.
Do you know that you can access more real Dell EMC D-PSC-MN-01 exam questions via Premium Access? ()
What is a precaution when working with Dell EMC PowerScale equipment?
Answer : C
When working with Dell EMC PowerScale equipment, safety precautions are essential to prevent equipment damage and personal injury. One critical precaution is ensuring that the equipment racks are stable to prevent tipping hazards.
Key Points:
Use of Side Stabilizers:
If the rack is not securely bolted to the floor, side stabilizers must be used.
Side stabilizers provide additional support and prevent the rack from tipping over during installation or maintenance activities.
This is especially important when equipment is being added or removed from the rack, which can shift the center of gravity.
Rack Stability:
Proper rack installation involves securely bolting the rack to the floor or using stabilizing devices.
Unstable racks pose a significant risk to personnel and equipment.
Safety Compliance:
Following the manufacturer's guidelines ensures compliance with safety regulations and standards.
Prevents accidents that could result in injury or damage.
Dell PowerScale Reference:
Dell EMC PowerScale Hardware Installation Guide:
Chapter on Rack Installation:
Recommends that if racks are not bolted to the floor, side stabilizers should be installed.
Provides detailed instructions on installing side stabilizers.
Safety Precautions:
Emphasizes the importance of rack stability during equipment installation and maintenance.
Best Practices:
Always verify that racks are secure before performing any work.
Use appropriate personal protective equipment (PPE) when working with heavy equipment.
Follow all safety warnings and cautions provided by Dell EMC.
A PowerScale customer is planning to expand a Dell EMC PowerScale Gen 5 cluster with H500 nodes.
What is a consideration?
Answer : A
When expanding a Dell EMC PowerScale Gen 5 cluster with Gen 6 nodes, such as the H500, certain requirements and considerations must be taken into account.
Key Points:
Minimum Node Requirement:
A minimum of three Gen 6 nodes is required to add to an existing Gen 5 cluster.
This is necessary to form a separate node pool within the cluster that maintains compatibility and optimal performance.
Compatibility Considerations:
Gen 6 nodes can be added to a Gen 5 cluster, but they must be added in groups of at least three nodes.
This ensures that the new nodes can participate fully in the cluster's operations and data protection schemes.
Node Pools:
The cluster will have separate node pools for Gen 5 and Gen 6 nodes.
Data can be moved or balanced between node pools according to policies and performance requirements.
Dell PowerScale Reference:
Dell EMC PowerScale OneFS Administration Guide:
Chapter on Cluster Expansion:
Discusses adding new nodes to an existing cluster and the requirements for different generations.
States the minimum number of nodes required when adding Gen 6 nodes to a Gen 5 cluster.
Dell EMC PowerScale Best Practices Guide:
Node Compatibility and Mixing:
Provides guidelines on mixing node generations within a cluster.
Recommends adding at least three nodes of the new generation.
Considerations:
Option B is incorrect because back-end support is available.
Option C is incorrect because Gen 6 nodes can be added to a Gen 5 cluster.
Option D is incorrect because the minimum required is three, not four.
When a platform engineer disconnects and removes the power supply from a Dell EMC PowerScale Gen 6 node, they see an LED on the inside of the compute module.
What does the LED indicate?
Answer : D
In Dell EMC PowerScale Gen 6 nodes, such as the ones in the F-series, nodes are deployed in pairs within a chassis, sharing power supplies for redundancy.
Key Points:
LED Indicator Inside Compute Module:
When a power supply is removed from one node, an LED inside the compute module may illuminate.
This LED indicates that the node is still receiving power from its pair node's power supply, ensuring continuous operation.
Redundant Power Supply:
PowerScale Gen 6 nodes are designed with redundant power configurations.
If one power supply fails or is removed, the paired node's power supply provides power to both nodes.
Safe Removal and Replacement:
The LED serves as a visual indicator that the node is still powered, and caution should be exercised when handling components.
There is no immediate shutdown or time limit for replacing the power supply due to the redundancy.
Dell PowerScale Reference:
Dell EMC PowerScale Hardware Installation Guide:
Chapter on Power Supply Replacement:
Explains the redundant power features and the role of the pairing between nodes.
Provides instructions on safely removing and replacing power supplies.
Visual Indicators:
Details the meaning of LEDs within the compute module.
Confirms that an illuminated LED in this context indicates redundant power from the pair node.
Best Practices:
Always verify the node's power status before performing maintenance.
Use the proper procedures to remove and replace hardware components to prevent damage.
What should the platform engineer do to retain critical information when replacing a system board on a Dell EMC PowerScale F200 node?
Answer : D
When replacing a system board (motherboard) on a Dell EMC PowerScale F200 node, critical system information such as the node's identity, network configuration, and cluster membership must be preserved.
Key Points:
EasyRestore Utility:
EasyRestore is a utility provided by Dell EMC to restore critical node information after hardware replacements like system boards.
It automates the process of restoring the node's identity and configuration without manual intervention.
Retention of Critical Information:
Running EasyRestore ensures that the node re-integrates into the cluster with the correct settings.
It restores the node's serial number, GUID, and other essential identifiers.
Procedure After System Board Replacement:
After physically replacing the system board, the platform engineer should boot the node and run EasyRestore.
This process retrieves the necessary information from the node's backup flash storage.
Dell PowerScale Reference:
Dell EMC PowerScale OneFS Administration Guide:
Chapter on Hardware Replacement Procedures:
Describes the steps to replace a system board and the importance of running EasyRestore afterward.
Details how EasyRestore works and what information it restores.
Technical Advisories:
Emphasize that failure to run EasyRestore may result in the node not functioning correctly within the cluster.
Incorrect Options:
Option A (isi_node_restore -force) is not the correct utility for this task.
Option B (Flash the BIOS) is unnecessary as the BIOS is part of the system board.
Option C (Reinstall the PowerScale license) is not required because licensing is managed at the cluster level, not per node.
After finishing the installation of a Dell EMC PowerScale Gen 6 cluster, a customer asks the platform engineer to demonstrate the proper way to remove and replace the front node bezel. They remove the bezel successfully.
What is the correct way to replace the bezel?
Answer : D
After removing the bezel from a Dell EMC PowerScale Gen 6 node, it's important to reinstall it correctly to maintain proper airflow and protect the hardware.
Steps to Replace the Bezel:
Alignment:
Align Bezel Ends with Clips:
Position the bezel in front of the node chassis.
Ensure that the ends of the bezel are aligned with the corresponding clips or slots on the chassis.
Attachment:
Press the Bezel Center:
Gently but firmly press the center of the bezel.
This action engages the clips on both ends simultaneously, securing the bezel to the chassis.
Why Option D is Correct:
Proper Technique:
Aligning the bezel ends with the clips ensures correct positioning.
Pressing the bezel center allows for even engagement of the clips, preventing misalignment or damage.
Why Other Options Are Incorrect:
Option A:
Checking for red LEDs is good practice but not directly related to bezel replacement.
Securing with thumb screws is not applicable as Gen 6 bezels typically do not use thumb screws.
Option B:
Pressing the left side and then the right side may not ensure proper alignment and could cause the bezel to be uneven.
Option C:
Pushing on the bezel ends without proper alignment may result in the clips not engaging correctly.
Dell PowerScale Reference:
Dell EMC PowerScale Hardware Installation Guide:
Section on Bezel Installation and Removal:
Provides instructions and illustrations on how to properly replace the bezel.
Emphasizes aligning the bezel and pressing the center for secure attachment.
Best Practices:
Ensure that no cables or obstructions are in the way before replacing the bezel.
Verify that the bezel is flush with the chassis after installation.
Additional Notes:
Airflow Management:
Proper bezel installation is crucial for maintaining optimal airflow and cooling within the node.
Protection:
The bezel protects internal components from dust and physical damage.
