Pass4Future also provide interactive practice exam software for preparing HP Advanced HPE Edge-to-Cloud Solutions (HPE7-V01) Exam effectively. You are welcome to explore sample free HPE7-V01 Exam questions below and also try HPE7-V01 Exam practice test software.
Do you know that you can access more real HPE7-V01 exam questions via Premium Access? ()
You are designing a solution for a customer that will support a virtualization workload based on HPE Synergy. Your customer has the following requirements:
Dual-socket HPE Synergy compute nodes running ESXi 8.x with maximum memory supported
Each node should have access to shared storage from HPE Alletra Storage MP B10000
All virtual machines should be protected against host failure
All virtual machines with vGPU must be protected with Fault Tolerance
All compute nodes should boot from disks located in the D3940 Storage Modules protected with RAID 1
All frames should be managed as one logical enclosure to simplify management
All compute nodes should support two network ports with the maximum Ethernet connectivity speed
You are reviewing a proposal that you must verify. The proposal consists of:
3 x HPE Synergy 12000 frames
2 x HPE Synergy Composer2 modules
4 x HPE Virtual Connect SE 100Gb F32 Modules for Synergy
4 x HPE Synergy 50Gb Interconnect Link Modules
3 x HPE Synergy D3940 Storage Modules, each with 20 SSD drives
1152 core VMware vSphere Enterprise Plus subscriptions
36 x HPE Synergy 480 Gen11 compute nodes
Each SY480 Gen11 is configured with:
A single Platinum CPU with 32 cores
HPE Synergy 6820C 25/50Gb Converged Network Adapter
HPE Synergy 5830C 32Gb Fibre Channel Host Bus Adapter
HPE MR416i-o Gen11 12G SAS Mezzanine Controller
Which two statements are true regarding the proposal? (Select two.)
Answer : C, D
The correct answers are C and D. In a three-frame HPE Synergy design using the primary/satellite fabric model, a redundant pair of HPE Virtual Connect SE 100Gb F32 modules can provide the intelligent fabric function while Interconnect Link Modules extend connectivity to satellite frames. Therefore, the proposal can be reduced by removing two unnecessary F32 modules if the remaining pair and link modules still satisfy the required redundant 25/50Gb connectivity. HPE describes the F32 architecture as consolidating data center network connections and scaling bandwidth across multiple Synergy frames using a primary/satellite design. Option D is also correct because Fibre Channel uplink functionality on the HPE Virtual Connect SE 100Gb F32 requires a separate Synergy 32Gb FC upgrade license. HPE OneView documentation states that the Synergy 32Gb FC Upgrade license is required for this interconnect to use Fibre Channel uplinks. Option B is false because the D3940 boot design still needs the SAS/RAID path. Option E is false because Fault Tolerance and advanced availability requirements make Standard an unsafe downgrade. Reference/topics: Synergy fabric validation, F32 FC licensing, D3940 boot architecture, VMware licensing review.
You are designing a solution for a customer that will support a virtualization workload based on HPE Synergy. Your customer has the following requirements:
Dual-socket HPE Synergy compute nodes running ESXi 8.x with maximum memory supported
Each node should have access to shared storage from HPE Alletra Storage MP B10000
All virtual machines should be protected against host failure
All virtual machines with vGPU must be protected with Fault Tolerance
All compute nodes should boot from drives located in the D3940 Storage Modules protected with RAID 1
All frames should be managed as one logical enclosure to simplify management
All compute nodes should support two network ports with the maximum Ethernet connectivity speed
You are reviewing a proposal that you must verify. The proposal contains:
3 HPE Synergy 12000 frames
2 HPE Synergy Composer2 modules
4 HPE Virtual Connect SE 100Gb F32 Modules for Synergy
4 HPE Synergy 50Gb Interconnect Link Modules
3 HPE Synergy D3940 Storage Modules, each with 20 SSD drives
1152 core vSphere Enterprise Plus subscriptions
36 HPE Synergy 480 Gen11 compute nodes
Each SY480 Gen11 is configured with:
A single Platinum CPU with 32 cores
HPE Synergy 6820C 25/50Gb Converged Network Adapter
HPE Synergy 5830C 32Gb Fibre Channel Host Bus Adapter
HPE MR416i-o Gen11 12G SAS Mezzanine Controller
Which two statements are true regarding the proposal? (Select two.)
Answer : C, D
The correct answers are C and D. In a three-frame HPE Synergy logical enclosure using the primary/satellite fabric model, the HPE Virtual Connect SE 100Gb F32 modules act as the intelligent primary modules and HPE Synergy 50Gb Interconnect Link Modules extend connectivity into satellite frames. A pair of F32 modules with the required satellite link modules can satisfy the fabric requirement; therefore, the extra two F32 modules can be removed if the design still preserves redundancy and required 25/50Gb downlink connectivity. Option D is also correct because Fibre Channel uplink functionality on the HPE Virtual Connect SE 100Gb F32 module requires a Synergy 32Gb FC Upgrade license. This is necessary when using the Synergy fabric to provide FC access to HPE Alletra Storage MP B10000. Option B is false because the D3940 storage module still requires the appropriate SAS/RAID path for boot-device protection. Option E is wrong because the stated FT/vGPU requirement makes Standard licensing an unsafe substitution. Reference/topics: HPE Synergy primary/satellite fabric, VC SE 100Gb F32, FC upgrade licensing, D3940 boot design, VMware subscription validation.
Your customer wants to simplify storage management for their VMware-based environment by configuring HPE Storage Integration Pack for VMware vCenter Server. They want to use HPE OneView for VMware vCenter Server for ESXi deployment.
Currently, they have 30 HPE ProLiant DL360 Gen11 deployed with ESXi 8.x and they plan to add 30 additional systems with exactly the same setup. Storage capacity is provided by HPE Alletra Storage MP B10000.
Which statement about the configuration and customer requirements is true?
Answer : D
The correct answer is D. HPE OneView for VMware vCenter integrates HPE infrastructure health, lifecycle, and management information into the VMware operational plane. A major value point is support for VMware Proactive HA integration, where hardware health signals from HPE infrastructure can be passed into vCenter so the cluster can react before a hard failure affects virtual machines. HPE documentation specifically includes VMware Proactive HA support for HPE OneView for VMware vCenter. Option A is incorrect because the VMware integration is not limited only to HPE Synergy managed by Composer2; it is also relevant to supported HPE ProLiant and other HPE-managed infrastructure. Option B is wrong because the VMware integration tools are not licensed in the simplified per-component way stated. Option C is also too restrictive because VVol and storage integration behavior depends on the array, vSphere support matrix, and storage provider capability, not a blanket rule requiring Enterprise Plus for the integration itself. The correct design focus is operational availability: Proactive HA improves workload placement and response when HPE hardware health degrades. Reference/topics: HPE OneView for VMware vCenter, Proactive HA, VMware integration, HPE infrastructure monitoring.
Which statement about Omnissa Horizon workloads is correct?
Answer : A
The correct answer is A. Omnissa Unified Access Gateway is the edge access component used with Horizon to provide secure remote access from an external network to internal Horizon desktops and applications. It is commonly positioned in a DMZ and avoids exposing internal Horizon infrastructure directly to external users. Omnissa documentation describes Unified Access Gateway as enabling secure remote access from external networks to Workspace ONE and Horizon resources, and Horizon installation guidance describes it as the default gateway for secure access to remote desktops and applications from outside the corporate firewall. Option B is incorrect because Horizon support is not limited to a minimum of more than 720 desktops, nor is it only supported through a generic HPE Compute qualification. Option C is technically wrong because Horizon can use supported VMware datastore types such as VMFS, NFS, and vVols depending on the validated design. Option D is also wrong because GPU resources are required only for graphics-accelerated use cases, not for every Horizon cluster. Reference/topics: workload requirement analysis, VDI architecture, HPE compute platform positioning, secure access design.
Your customer has a combination of HPE and non-HPE equipment.
Which is the correct functionality available in Aruba Fabric Composer for this customer's environment?
Answer : D
The correct answer is D. Aruba Fabric Composer is a data-center fabric automation and visibility platform for ArubaOS-CX network fabrics, and it can integrate with external virtualization managers such as VMware vSphere. In a mixed HPE and non-HPE environment, this matters because the compute hardware vendor is not the deciding factor for visibility into VMware-owned networking constructs. Aruba Fabric Composer can recognize VLAN groups owned or managed by external resources such as VMware vSphere, and the user guide explicitly describes VMware vSphere as an external manager that can own and manage VLAN groups. Option A is wrong because HPE Alletra Storage MP B10000 array management belongs to HPE storage management services such as DSCC/Data Ops Manager, not Aruba Fabric Composer. Option B is wrong because SAN zoning is Fibre Channel fabric work, not a function of ArubaOS-CX Ethernet switching. Option C is also incorrect because Pensando Distributed Services Cards are not managed through Aruba Fabric Composer as a general server-card management plane. Reference/topics: Aruba Fabric Composer, VMware integration, VLAN visibility, mixed-infrastructure discovery.
