Which configuration steps will add untagged ethernet ports 1/1/1 and 1/1/2 and tagged ethernet port 1/2/1 to VLAN 10?

Auntagged ethernet 1/1/1 to 1/1/2 vlan 10
tagged ethernet 1/2/1 vlan 10

Buntagged ethernet 1/1/1 to 1/1/2
tagged ethernet 1/2/1
vlan 10

Cvlan 10
no tagged ethernet 1/1/1 to 1/1/2
tagged ethernet 1/2/1

Dvlan 10
untagged ethernet 1/1/1 to 1/1/2
tagged ethernet 1/2/1

Answer : D

Which device will become the root in the Spanning Tree election process?

Athe device with root guard enabled

Bthe device with the highest IP address

Cthe device with the lowest bridge ID

Dthe device with the highest bridge priority value

Answer : D

The root bridge is connected to another switch over two independent 10Gbe links. Which link will remain in a forwarding state on both sides?

Athe link with the lowest port number on the non-root switch

Bthe link with the lowest port number on the root switch

Cthe link with the highest port number on the root switch

Dthe link with the highest port number on the non-root switch

Answer : B

Which two commands display Power over Ethernet (PoE) power budget? (Choose two.)

Ashow configuration

Bshow inline power

Cshow version

Dshow chassis

Eshow inline power detail

Answer : B, E

As an IP packet is routed across subnets, which value gets updated at each hop?

Adestination MAC address

Bdestination IP address

Csource IP address

Dsubnet mask

Answer : A

Free Practice Questions for RUCKUS RCNI Exam